DM1105. Switches LAN.
DM1105E
Switches LAN

The DATACOM DM1200E switching line offers Gigabit Ethernet wire speed solution to meet the increasing demand in enterprise network applications due to its 10Gbps uplink. It has full L2 functionalities and static routing. Formed by different fixed configuration models for 19" rack installation, it allows the deployment of low cost networks with high traffic capacity.

Características

Wire Speed L2

The switches have switching capacity ranging from 56Gbit/s to 216Gbit/s with all packet processing implemented in hardware, at wire-speed, ensuring the switching of all packets without blocking traffic. Filter functionalities are also performed in hardware, with no impact on CPU performance or packet forwarding.

 

Management Facilities

The switches in the line have a CLI configuration interface with automatic syntax assistance, accessible via SSH, Telnet and RS-232 Console. Internal Web Server and SNMP agent are also available. To facilitate firmware version and configuration management, it is possible to store two different firmware versions and two different configurations simultaneously in the equipment's memory.

 

Security

To ensure network security, switches allow the creation of a reliable management structure through authentication via RADIUS. It also supports protection against Denial of Service (DoS/DDoS) attacks and port and MAC Address authentication in accordance with IEEE802.1x. It has protection mechanisms against broadcast and multicast attacks.

 

Switching Features

The DM1105E switches support a series of advanced features, such as simultaneous VLAN configuration, Link Aggregation and Spanning Tree network redundancy and protection protocol (STP, MSTP and RSTP). For Multicast, IGMP Snooping and MLD Snooping functionality is supported.

For network optimization, the switches have 8 CoS queues per port with traffic classification by IEEE802.1p and multiple matches using ACLs, allowing bandwidth limitation and traffic shaping.

 

Power over Ethernet

The DM1105E 24GP+4XS and DM1105E 48GP+6XS models follow the IEEE 802.3at standard and provide 24 and 48 PoE+ ports respectively, limited to an instantaneous power consumption of 380W (24GP) and 400W (48GP), enabling power and data transmission via the same Cat.5e or Cat.6 cable. This application is recommended for powering and connecting equipment such as Access Points, IP phones and IP cameras.

 

Hardware and Software Options

 

DM1105E 24GT+4GX

DM1105E 24GT+4GX

  • 24 ports 10/100/1000Base-T (RJ45)
  • 4 1000Base-X ports (SFP)
  • Switching capacity of up to 56Gbit/s
  • Forwarding up to 41.7Mpps
  • MAC table with 8,000 addresses


DM1105E 24GP+4XS

  • 24 PoE+ ports 10/100/1000Base-T (RJ45)
  • 4 10GBase-X ports (SFP/SFP+)
  • Switching capacity of up to 128Gbit/s
  • Forwarding up to 95.2Mpps
  • MAC table with 16,000 addresses.
  • Budget for 380W PoE+ power


DM1105E 48GT+6XS

  • 48 ports 10/100/1000Base-T (RJ45)
  • 6 10GBase-X ports (SFP/SFP+)
  • Switching capacity of up to 216Gbit/s
  • Forwarding up to 129.3Mpps
  • MAC table with 32,000 addresses.


DM1105E 48GP+6XS

  • 48 PoE+ ports 10/100/1000Base-T (RJ45)
  • 6 10GBase-X ports (SFP/SFP+)
  • Switching capacity of up to 216Gbit/s
  • Forwarding up to 129.3Mpps
  • MAC table with 16,000 addresses.
  • Budget for 400W PoE+ power

 

Applications

Typical applications for DM1105E devices are corporate local area networks, where the connectivity of user computers is Gigabit Ethernet (GBE), with 10G Ethernet uplinks.